Published in Peer Review Journals

• Minaoglou P., Tzotzis A., Sahaya Dennish B.G., Kyratsis P., (2025), "Tetsing the degree of influence on tensile strength of 3D printing parameters in carbon fiber reinforced PETG", International Journal of Modern Manufacturing Technologies, Vol. 17(1), 55-62.
  
• Tzotzis A., Nedelcu D., Mazurchevici S.N., Kyratsis P., (2025), "Investigating the Machining Behavior of the Additively Manufactured Polymer-Based Composite Using Adaptive Neuro-Fuzzy Learning", Applied Sciences, 15, 5373. https://doi.org/10.3390/app15105373
• Jingru Yan, Muyuan Zhou, Afshana Morshed, Hui Wu, Xiaojun Liang, Zhao Xing, Hongbin Li, Yongnian Zhu, Liang Zhao, Wuxiao Gao, Sihai Jiao, Nedelcu Dumitru, Panagiotis Kyratsis, Zhengyi Jiang, (2025), "Study on wear performance of a novel high-carbon medium manganese bimetal composite using in mining facilities", The International Journal of Advanced Manufacturing Technology, 137:5015–5026
• Shehu D., Luarasi T., Kyratsis P., (2025), ''Designing an NLP-Driven Communication System for Urban Planning: A Case Study'', Journal of Chinese Architecture and Urbanism, 8417.
• Tzotzis A., Maropoulos P., Kyratsis P., (2025), "A dynamic surface roughness prediction system based on machine learning for the 3D-printed Carbon-Fiber-Reinforced-Polymer (CFRP) turning", Journal of Intelligent Manufacturing,  https://doi.org/10.1007/s10845-025-02602-8
• Rusu P.D., Bialas O., Wozniak A., Adamiak M., Appiah A., Tampu C, Mazurchevici S.N., Kyratsis P., Tzotzis A., Nedelcu A., Mindru T.D., Nedelcu D., (2025), "Characterization of the Laser Textured Surfaces of Parts from Biodegradable Polymer", Coatings, 15(2), 246; https://doi.org/10.3390/coatings15020246
• Firtikiadis L., Kyratsis P., Kakoulis K., Efkolidis N, (2025), "Computational product design and prototyping of customized sandals", Academic Journal of Manufacturing Engineering, 23(1), 54-65
• Tzotzis A., Efkolidis N., Cheng K., Kyratsis P. (2025), "Multiple Regression Analysis and NSGA-II Optimization of Machining Carbon-Fiber-Reinforced PET-G Parts Fabricated via Additive Manufacturing under Dry and Lubricated Conditions", Lubricants, 13(2), 63; https://doi.org/10.3390/lubricants13020063
• Manavis A., Tzotzis A., Firtikiadis L., Kyratsis P., (2025), "ANN-based structural analysis of the 3D-printed PETG tensile specimens", Machines, 13(2), 86; https://doi.org/10.3390/machines13020086
• Tzotzis A., Manavis A., Efkolidis N., Kyratsis P., (2024), "Modeling the Strength-To-Mass ratio of the fused filament fabricated ABS polymer with ANN", International Journal of Modern Manufacturing Technologies, Vol. 16(2), https://doi.org/ 10.54684/ijmmt.2024.16.2.7
• Firtikiadis L., Tzotzis A., Kyratsis P., Efkolidis N, (2024), "RSM-based evaluation of the 3D-printed recycled-PETG tensile strength", Applied Mechanics, 5(4), 924-937; https://doi.org/10.3390/applmech5040051
• Nazlidou I., Efkolidis N., Kakoulis K., Kyratsis P., (2024), "Innovative and Interactive Technologies in Creative Product Design Education: a review", Multimodal Technologies and Interaction, 8(12), 107; https://doi.org/10.3390/mti8120107
• Tzotzis A., Efkolidis N., García-Hernandez C., Kyratsis P. (2024), "Multivariate analysis of AISI-52100 steel machining: A combined finite element-artificial intelligence approach", International Journal of Mechatronics and Manufacturing Systems, 17(2), 99-116.
• Tzotzis A., Efkolidis N., Manavis A., Kyratsis P., (2024), "Drilling performance analysis of structural aluminum alloy using the Taguchi method", ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics and Engineering, Vol. 67(2S), 531-538.
• Manavis A., Liokos T., Efkolidis N., Kyratsis P., (2024), "Holistic product design for the fur fabric industry: A brand-based approach", ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics and Engineering, Vol. 67(2S), 539-548.
• Minaoglou P., Tzotzis A., Efkolidis N., Kyratsis P., (2024), "Influence of the 3D printing fabrication parameters on the tensile properties of carbon-based composite filament", Applied Mechanics, 5(4), 745-761.
• Tzotzis A., Nedelcu D., Mazurchevici S.N., Kyratsis P., (2024), "Surface quality evaluation of 3D-printed carbon-fiber-reinforced PETG polymer during turning: Experimental analysis, ANN modeling and optimization", Polymers, 16(20), 2927.
• Dubey A.D., Kumar J., Kyratsis P., Verma RK., (2024), "Stacking effect of Carbon/Glass Fiber during Drilling Operation of Laminated Polymer Composite", Archive of Metallurgy and Materials, 69(2), 589-598.
• Manavis A., Minaoglou P., Efkolidis N., Kyratsis P., (2024), "Digital customization for product design and manufacturing: a case study within the furniture industry", Electronics, 13(13), 2483.
• Firtikiadis L., Manavis A., Kyratsis P., Efkolidis N., (2024), "Product design trends within the footwear industry: A review", Designs, 8(3), 49.
• Tsagaris A., Polychroniadis C., Tzotzis A., Kyratsis P., (2024), "Cost-effective Robotic Arm Simulation and System Verification", International Journal of Intelligent Systems and Applications, 2, 1-12.
• Minaoglou P., Efkolidis N., Manavis. A.,  Kyratsis P., (2024), "A review on wearable product design and applications", Machines, 12(1), 62; https://doi.org/10.3390/machines12010062
• Tzotzis A., Manavis A., Efkolidis N., García-Hernández C., Kyratsis P., (2024), "Analysis of the influence of structural characteristics on the tensile properties of the fused filament fabricated ABS polymer using Central Composite Design", Applied Mechanics, 5(1), 20-35.
• Manavis A., Efkolidis N., Kyratsis P., (2023), "Artificial Intelligence in Product Development", Interdisciplinary Journal of Architecture and Built Environment, 27, 16-21.
• Tzotzis A., Korlos A., Verma R.K., Kyratsis P., (2023), "ANN-based surface roughness modelling of AA7075-T6 slot milling: cutting technique evaluation", Academic Journal of Manufacturing Engineering, 21(4), 27-37.
• Minaoglou P., Kakoulis K., Manavis A., Kyratsis P., (2023), "Computational wearable design: shoe sole modelling and prototyping", International Journal of Modern Manufacturing Technologies, 15(2), 143-151.
• Kakoulis K., Konstantinidis P., Manavis A., Kyratsis P., (2023), "A system for automatic dimensioning of mechanical drawings", International Journal of Modern Manufacturing Technologies, 15(3), 67-74.
• Tsagaris A., Kyratsis P., Mansour G., (2023), "The Integration of Genetic and Ant Colony Algorithm in a Hybrid Approach", International Journal of Intelligent Systems and Applications in Engineering, 11(2), 336–342.
• Manavis A., Kakoulis K., Kyratsis P., (2023), "A brief review of computational product design: a brand identity approach", Machines 2023, 11(2), 232; https://doi.org/10.3390/machines11020232
• Tzotzis A., Tsagaris A., Tapoglou N., Kyratsis P., (2023), "High-precision CAD-based simulation for turning considering tool microgeometry", International Journal of Mechatronics and Manufacturing Systems, 16(1), 83-95.
• Bountourelis T.E., Kladovasilakis N., Tsongas K., Kyratsis P., Tzetzis D., (2023), "Finite element analysis and topology optimization of a high-performance lower prosthetic limb", International Journal of Modern Manufacturing Technologies, 15(1), 148-154.
• Manavis A., Kakoulis K., Efkolidis N., Kyratsis P., (2022), "Brand identity for product design through computational design techniques", ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics and Engineering, 65(4S), 1221-1228.
• Tzotzis A., Efkolidis N., Kakoulis K., Kyratsis P., (2022), "RSM-based surface roughness modelling during AISI-H13 slot milling", ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics and Engineering, 65(4S), 1417-1424.
• Manavis A., Tzotzis A., Tsagaris A., Kyratsis P., (2022), "A Novel Computational-based Visual Brand Identity (CbVBI) product design methodology", Machines, 10(11), 1065 https://doi.org/10.3390/machines10111065.
• Manavis A., Firtikiadis L., Spahiu T., Efkolidis N., Kyratsis P., (2022), "Parametric Architectural Design using shapes and structures", Journal of Graphic Engineering and Design, 13(4), 13-20.
• Maravelakis E., Konstantaras A., Kyratsis P., Bolanakis N., Vidakis N., Petousis M., Kabassi K., (2022), "User friendly haptic tool for soccer fans with vision disabilities: Design and proof of concept", Journal of Graphic Engineering and Design, 13(3), 2.
• Meretis E., Tzimtzimis E., Tsongas K., Kyratsis P., Tzetzis D., (2022), "Fabrication and Nanomechanical Testing of Conductive Nanocomposites Filaments for FFF 3D Printing: development of a 3D printed emergency stop button", Academic Journal of Manufacturing Engineering, 20(1),  47-55.
• Tzotzis A., Tapoglou N., Verma R.K., Kyratsis P., (2022),"3D-FEM Approach of AISI-52100 Hard Turning: Modelling of Cutting Forces and Cutting Condition Optimization", Machines 10(2), 74.
• Fountas N.A., Aslani K.E., Kechagias J.D., Kyratsis P., Vaxevanidis N.M. (2021), "Experimental and Statistical Study of Surface Roughness in CNC Slot Milling of AL 7075 Alloy Using Full and Fractional Factorial Design", Tribology in Industry, DOI: 10.24874/ti.1151.07.21.11
• Tzotzis A., Manavis A., Efkolidis N., Kyratsis P., (2021), "CAD-based automated G-code generation for drilling operations", International Journal of Modern Manufacturing Technologies, 13(3), pp. 177-184.
• Tzotzis A., Efkolidis N., Oancea G., Kyratsis P., (2021), "FEM-based comparative study of square & rhombic insert machining performance during turning of AISI-D3 steel", International Journal of Modern Manufacturing Technologies, 13(2), pp. 143-148.
• Karmiris-Obratański P., Karkalos NE., Skondras-Giousios D., Papazoglou EL., Kyratsis P., Markopoulos AP., (2021), "Experimental study on the hole quality during abrasive waterjet drilling of CFRP", International Journal of Modern Manufacturing Technologies, 13(2), pp. 103-108.
• García-Hernández C., Garde-Barace J.J., Valdivia-Sánchez J.J., Ubieto-Artur P., Bueno-Pérez J.A., Cano-Álvarez B., Alcázar-Sánchez M.A., Valdivia-Calvo F., Ponz-Cuenca R., Huertas-Talón J.L., Kyratsis P., (2021), "Trochoidal Milling Path with Variable Feed. Application to the Machining of a Ti-6Al-4V Part", Mathematics 2021, 9(21), 2701; https://doi.org/10.3390/math9212701
• Manavis A., Kyratsis P., (2021), "A computational study on product shape generation to support brand identity", International Journal of Modern Manufacturing Technologies, 13(1), 115-122.
• Dobras M., Manavis A., Kyratsis P., (2021), "Innovative packaging design", International Journal of Manufacturing Economics and Management, 1(1), 6-12.
• Mansour G., Kyratsis P., Korlos A., Tzetzis D., (2021), "Investigation into the effect of cutting conditions in turning on the surface properties of filament winding GFRP pipe rings", Machines, 9(1), 16, https://doi.org/10.3390/machines9010016
• Kyratsis P., Tzotzis A., Markopoulos A., Tapoglou N., (2021), "CAD-based 3D-FE modelling of AISI-D3 turning with ceramic tooling", Machines, 9(1), 4. https://doi.org/10.3390/machines9010004
• Spahiu T., Almeida H., Manavis A., Kyratsis P., (2020), "Fashion products through digital manufacturing - a case study with FDM technology", Academic Journal of Manufacturing Engineering, 18(4),  63-72.
• Kladovasilakis N., Tsongas K., Kyratsis P., Tzetzis D., (2020), "Finite element analysis of hip implants with additive manufactured lattice internal geometry", International Journal of Modern Manufacturing Technologies, 12(3), 59-64.
• Tzotzis A., Garcia-Hernandez C., Huertas-Talon J.L., Kyratsis P., (2020), "CAD-based automated design of FEA ready cutting tools", Journal of Manufacturing and Materials Processing, 4(4), 104. https://doi.org/10.3390/jmmp4040104
• Kyratsis P., Tzetzis D., Davim J.P., Efkolidis N., (2020), "Prediction of Thrust Force and Cutting Torque in Drilling of Al 6082-T6 by Using the RSM Methodology", Journal of Manufacturing Technology Research, 12(3-4).
• Tzotzis A., Garcia-Hernandez C., Huertas-Talon J.L., Kyratsis P., (2020), "Influence of the Nose Radius on the Machining Forces Induced during AISI-4140 Hard Turning: A CAD-Based and 3D FEM Approach", Micromachines, 11, 798. doi:10.3390/mi11090798
• Tzotzis A., Garcia-Hernandez C., Huertas-Talon J.L., Kyratsis P., (2020), "3D FE modeling of machining forces during AISI 4140 hard turning", Journal of Mechanical Engineering-Strojniski-vestnik, 66(7-8), 467-478.
• Tzotzis A., Garcia-Hernandez C., Huertas-Talon J.L., Kyratsis P., (2020), "FEM based mathematical modeling of thrust force during drilling of Al7075-T6", Mechanics & Industry, 21, 415.
• Kyratsis P., (2020), 'Computational design and digital manufacturing applications', International Journal of Modern Manufacturing Technologies, 12(1), pp. 82-91.
• Malea A., Tzotzis A., Manavis A., Kyratsis P., (2020), 'Innovative and sustainable toothpaste packaging design', Journal of Graphic Engineering and Design, 11(1), 19.
• Aslani K.E., Chaidas D., Kechagias J., Kyratsis P., Salonitis K., (2020), 'Quality performance evaluation of thin walled PLA 3D printed parts using the Taguchi Method and Grey Relational Analysis', Journal of Manufacturing and Materials Processing, 4, 47. doi:10.3390/jmmp4020047
• Iatrou G., Tzotzis A., Kyratsis P. Tzetzis D., (2020), 'Aerodynamic based shape optimization using CFD: a training case study', Academic Journal of Manufacturing Engineering, 18(1), pp. 21-30.
• Kyratsis P., Kakoulis K., Markopoulos A., (2020), 'Advances in CAD/CAM/CAE technologies', Machines, 8(1), 13, https://doi.org/10.3390/machines8010013.
• Vakondios D., Kyratsis P., (2020), 'An innovative CAD-based simulation of ball-end milling in microscale', Advances in Computational Design, 5(1), pp. 13-35. doi: https://doi.org/10.12989/acd.2020.5.1.013
• Kyratsis P., Manavis A., Gianniotis P., Ghiculescu L.D., (2019), 'A non conventional methodology for interior product design using conceptual design principles and parametric tools', Nonconventional Technologies Review, 23(4), pp. 16-21.
• Giannakis E., Koidis Ch., Kyratsis P., Tzetzis D., (2019), 'Static and fatigue properties of 3D printed continuous carbon fiber nylon composites', International Journal of Modern Manufacturing Technologies, 11(3), pp 75-82.
• Kyratsis P., Gabis e., Tzotzis A., Tzetzis D., Kakoulis K., (2019), 'CAD based product design: A case study', International Journal of Modern Manufacturing Technologies, 11(3), pp 88-93.
• Vasileiadis Th., Tzotzis A., Tzetzis D., Kyratsis P., (2019), 'Combining product and packaging design for increased added value and customer satisfaction', Journal of Graphic Engineering and Design, 10(2).
• Efkolidis N., Markopoulos A., Karkalos N., Garcia-Hernandez C., Huertas-Talon J.L., Kyratsis P., (2019), "Optimizing models for sustainable drilling operations using genetic algorithm for the optimum ANN", Applied Artificial Intelligence, 33(10), https://doi.org/10.1080/08839514.2019.1646014
• Velikis K., Efkolidis N., Kyratsis P., Tzetzis D., (2019), "Design process and development of a prototype electric wheelchair", Academic Journal of Manufacturing Engineering, 17(2), 53-59.
• Papachristou E., Kyratsis P., Bilalis N., (2019), "A comparative study of open source and licensed CAD software to support garment development learning", Machines, 7(2), 30, https://doi.org/10.3390/machines7020030
• Manavis A., Sourris Th., Dimou E., Efkolidis N., Kyratsis P., (2019), "An inspired from nature design methodology for in store displays", Journal of Packaging Technology and Research https://doi.org/10.1007/s41783-019-00057-w
• Efkolidis N., Garcia-Hernandez C., Huertas-Talon J.L., Kyratsis P., (2019), 'Promote sustainability through product design by involving the user', Environmental Engineering and Management Journal, 18(9), pp. 1885-1896.
• Karkalos N., Efkolidis N., Kyratsis P., Markopoulos A. (2019), "A comparative study between regression and neural networks for modeling Al8082-T6 Alloy drilling", Machines, 7(1), 13. https://doi.org/10.3390/machines7010013
• Marinescu N., Ghiculescu D., Kyratsis P. Aluper O., Pirnau C., (2018), "Building of a rotary head for ultrasonically aided electrical discharge machining", Nonconventional Technologies Review, 22(4), 53-57.
• Ghiculescu D., Marinescu N., Kyratsis P., Aluper O., Pirnau C., (2018), "Testing of a rotary head for ultrasonically aided electrical discharge machining", Nonconventional Technologies Review, 22(4), 47-52.
• Efstathiadis A., Koidis C., Tzetzis D. Kyratsis P., (2018), "Comparative study and analysis on the mechanical properties of 3D printed surgical instrument for in-space applications", Academic Journal of Manufacturing Engineering, 16(4), 26-32.
• Kyratsis P., Tzotzis A., Tzetzis D. Sapidis N., (2018), "Pneumatic cylinder design using CAD-based programming", Academic Journal of Manufacturing Engineering, 16(2), 107-113.
• Efkolidis N., Garcia-Hernandez C., Huertas-Talon J.L., Kyratsis P., (2018), 'Modelling and prediction of thrust force and torque in drilling operations of Al7075 using ANN and RSM Methodologies', Strojinski vestnik-Journal of Mechanical Engineering, 64(6), 351-361. DOI:10.5545/sv-jme.2017.5188
• Kyratsis P., Markopoulos A., Efkolidis N., Maliagkas V., Kakoulis K., (2018), 'Prediction of thrust force and cutting torque in drilling based on the response surface methodology', Machines, 6(2), 24. https://doi.org/10.3390/machines6020024
• Tsagaris A., Stampoulis K., Kyratsis P., (2018), 'Hand finger gesture modeling in advanced CAD system', Computer Aided Design and Applications, Vol. 15(3), pp. 281-287. https://doi.org/10.1080/16864360.2017.1397880
• Kosmaras A., Tzetzis D., Kyratsis P., (2017), 'Finite element analysis and experimental validation of a novel oxygen pressure regulator', Academic Journal of Manufacturing Engineering, Vol. 15(4), pp. 67-74.
• Vakondios D., Kyratsis P., Lyronis A., Antoniadis A., (2017), 'Surface topomorphy and roughness prediction in micro-ball-end milling using a CAD based simulation', International Journal of Machining and Machinability of Materials, Vol. 19(4), pp 313-324.
• Karayannis V., Lamprakopoulos S., Domopoulou a., Kyratsis P.,  Papapolymerou G., Spiliotis X., (2017), 'Processing of steel mill scale for manufacturing novel engineering ceramics by powder metallurgy', Academic Journal of Manufacturing Engineering, Vol. 15(2), pp. 56-63.
• Efkolidis N., Garcia-Hernandez C., Huertas-Talon J.L., Kyratsis P., (2017), 'Sustainability and distance learning: technical Universities sharing high cost resources', International Journal of Engineering Education, Vol. 33(5), pp. 1-8.
• Kouveli A., Tzetzis D., Kyratsis P., (2017), 'Packaging design in today's industries: the case of olive oil packaging industry', Journal of Packaging Technology and Research,Vol. 1(1), pp. 13,  DOI: 10.1007/s41783-017-0008-z.
• Alexandridis G., Symeonidou I., Tzetzis D., Kakoulis K., Kyratsis P., (2016), 'An integrated workflow of biomimetic design, material selection and computer aided engineering', Academic Journal of Manufacturing Engineering, Vol. 14(4), pp. 12-18.
• Karayannis V., Domopoulou A., Baklavaridis A., Kyratsis P., (2016), 'Ceramic processing via microwave irradiation, Academic Journal of Manufacturing Engineering, Vol. 14(4), pp. 54-61.
• Papadopoulos K., Tzetzis D., Oancea G., Kyratsis P., (2016) 'Reverse engineering of a milktank and evaluation of volume metering procedure', Academic Journal of Manufacturing Engineering, Vol. 14(1), pp. 28-35.
• Moutaftsi P., Kyratsis P. (2016), 'Visual brand identity of food products: a customer's perspective', Journal of Applied Packaging Research, Vol. 8(3), pp.1-14.
• Gella-Marin R.M., Garcia-Hernandez C., Huertas-Talon J.L., Kyratsis P., (2016), 'Increasing laboratory capacity of a gear measurement practical session using freeware applications', International Journal of Engineering Education, Vol. 32(1A), pp. 1-6.
• Garcia-Hernandez C., Gella-Marin R.M.,  Huertas-Talon J.L., Efkolidis N., Kyratsis P., (2015) 'WEDM manufacturing method for noncircular gears using CAD/CAM software', Journal of Mechanical Engineering-Strojniski vestnik, Vol. 62(2), pp. 137-144..
• Kyratsis P., Taousanidis N., Tsagaris A., Kakoulis K., (2015), 'Drilling mathematical models using response surface methodology', International Journal of Mechanical and Mechatronics Engineering, Vol. 15(6), pp. 9-15.
• Koumartzis N., Tzetzis D., Kyratsis P., Kotsakis R.G. (2015), 'A new Music Instrument from ancient times: Modern reconstruction of the Greek Lyre of Hermes using 3D laser scanning, advanced computer aided design and audio analysis', Journal of the New Music Research, Vol. 44(4), pp. 324-346.
• Tzetzis D., Sofianidis I., Kyratsis P., (2015), 'Injection Molding Simulation for Part Manufacture with Polystyrene', Applied Mechanics and Materials, Vol. 809-810 (Part 1), pp. 229-234.
• Kyratsis P., Efkolidis N., Manavis A., Tsagaris A., (2015) 'Design for Skin and Shape: An Innovative Design Approach', Applied Mechanics and Materials, Vol. 809-810 (Part 2), pp. 1311-1316.
• Efkolidis N., Garcia-Hernandez C., Kyratsis P., Huertas-Talon J.L., (2015), 'Design for Green Usability: A New User Centered Methodology for Product Development', Applied Mechanics and Materials, Vol. 809-810 (Part 2), pp. 1372-1377.
• Tzetzis D., Sofianidis I., Kyratsis P., (2015), 'Computer aided injection multi cavity molding process analysis of thermoplastic polymers', Applied Mechanics and Materials Vol. 808, pp. 107-112.
• Kyratsis P. Kakoulis K. (2015), "Simulating Drilling Using a CAD System", International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 9(6), pp. 942-946.
• Tsagaris A., Tzetzis D., Mansour G., Hatzikos E., Kyratsis P., (2015), 'Improving the tensile strength of a novel double hook design manufactured by nanosilica epoxy reinforced aramid/carbon composites', Applied Mechanics and Materials, Vol. 760, pp. 3-8.
• Kyratsis P., Dimou E., Manavis Ath., Bilalis N., (2015), 'An inspired from nature design methodology for the fashion industry', Applied Mechanics and Materials, Vol. 760, pp. 33-38.
• Kyratsis P., Manavis Ath., (2015), 'CAD based drilling simulations for Al7075', Applied Mechanics and Materials, Vol. 760, pp. 87-92.
• Kyratsis P., Kakoulis K., Maravelakis E., (2014), 'Drilling simulations using a 3D CAD system', International Journal of Advancements in Mechanical and Aeronautics, Vol. 1(3), pp. 135-139.
• Kyratsis P., Dimou E., Efkolidis N., Manavis Ath., (2014), 'Conceptual product design inspired from nature', Applied Mechanics and Materials, Vol. 657, pp. 1026-1030.
• Kyratsis P., Manavis Ath., Garcia-Hernandez C., Efkolidis N., (2014), 'Creative Design for Skin and Shape using advanced CAD systems', Applied Mechanics and Materials, Vol. 657, pp. 1021-1025.
• Chatzikonstantinou A., Tzetzis D., Kyratsis P., Bilalis N., (2014), 'Replica fabrication of a Greek Paleontological find utilising laser scanning and fused deposition modeling', Applied Mechanics and Materials, Vol. 657, pp. 795-799.
• Efkolidis N., Kikis V., Mavroidis V., Kyratsis P., (2014), 'Design of local products as the key for sustainability', International Journal of Product Design, Vol. 5(2), pp. 115-124.
• Moraiti M., Belis T., Pappa M., Kyratsis P. Maravelakis E., Antoniadis A., (2014), 'Chip formation characteristics in high speed machining utilizing high speed microvideography', Academic Journal of Manufacturing Engineering, Vol. 12(1), pp. 6-13.
• Kyratsis P., Efkolidis N., Athanasios Manavis Ath., Asimopoulos N., (2014), ‘The impact of green labeling to lifecycle thinking’, International Journal of Product Design, Vol. 5(1), pp. 43-53.
• Achillas Ch., Banias G., Tzetzis D., Kyratsis P., Moussiopoulos N. (2014), ‘Investing in product design education in times of economic crisis’, International Journal of Product Design, Vol. 5(1), pp. 23-41.
• Kyratsis P., Efkolidis N., Manavis Ath., Peristeri St., (2013), 'Design for Skin and Shape in the packaging industry', Academic Journal of Manufacturing Engineering, Vol. 11(4), pp. 56-61.
• Manavis A., Efkolidis N., Peristeri S., Kyratsis P., Asimopoulos N., (2013), 'Designing the visual identity of the Greek Goji Berry', The Cyprus Journal of Science, Vol. 11, pp. 129-141.
• Dinopoulou V., Kakoulis K. Kyratsis P., (2013), 'Optimal Assembly Plan and Control of Networks', International Journal of Engineering Research and Development, Vol. 9(3), pp. 10-16.
• Kyratsis P., Efkolidis N., Tsagaris A., (2012), 'CAD based material selection for sustainable design', International Journal of Engineering Research and Development, Vol. 1, No 8, pp. 54-59.
• Kyratsis P., Efkolidis N., Sirganis K., Tsagaris A., (2012), 'The environmental friendly material selection using advanced CAD systems', Academic Journal of Manufacturing Engineering, Vol. 10(3), pp. 44-51.
• Tsagaris A., Efkolidis N., Stampoulis K., Kyratsis P., (2012), 'Reverse engineering techniques integrated into robotic system for surface reconstruction', Academic Journal of Manufacturing Engineering, Vol 10(3), pp. 113-119.
• Vakondios D., Kyratsis P., Yaldiz S., Antoniadis A., (2012), 'Influence of milling strategy on the surface roughness in ball end milling of the aluminum alloy Al7075-T6', Measurement, Vol. 45(6), pp. 1480-1488.
• Efkolidis N., Kyratsis P., (2012), 'Ecology Push: a novel methodology in product design', International Journal of Modern Engineering Research, Vol. 2(2), pp. 89-94.
• Kyratsis P., Bilalis N., Antoniadis A., (2011), 'CAD-based simulations and design of experiments for determining thrust force in drilling operations', Computer Aided Design, Elsevier, Vol. 43, pp. 1879-1890.
• Agalianos F., Patelis S., Kyratsis P., Maravelakis E., Vasamidis E. Antoniadis A. (2011) 'Industrial applications of laser engraving: influence of the process parameters on machined surface quality', International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 5(11), pp. 2226-2229.
• Alexopoulos V., Kyratsis P., Efkolidis N., (2011), 'Feta cheese packaging designs using advanced CAD/CAM systems', The Cyprus Journal of Sciences, Vol. 9, pp. 49-57.
• Tsagaris A., Kyratsis P., Stampoulis K., Dinopoulou V., (2011), 'Optimisation of storage system controlled by PLC and SCADA using genetic algorithms', The Cyprus Journal of Sciences, Vol. 9, pp. 59-69.
• Kyratsis P., Tapoglou N., Bilalis N., Antoniadis A., (2011), 'Thrust force prediction of twist drill tools using a 3D CAD system application programming interface', Int. J. Machining and Machinability of Materials, Vol. 10, pp. 18-33.
• Kyratsis P., Chatzigeorgiou Ch., Tsagkaris, A.,  Dinopoulou V., (2010), 'Failure mode and effect analysis (FMEA) implementation in conference tourism services', The Cyprus Journal of Sciences, Vol. 8, pp. 119-131.
• Kyratsis P., Bilalis N., Antoniadis A., (2009) 'CAD based predictive models of the undeformed chip geometry in drilling', International Journal of Mechanical Systems Science and Engineering, Vol. 1, pp 129-135.
• Tigkiropoulos K., Kyratsis P., Dinopoulou V., (2009), 'Business process reengineering through process simulation: a case study', The Cyprus Journal of Sciences, Vol. 7, pp. 73-91.
• Kyratsis P., Bilalis N., Dimitriou V., Antoniadis A., (2008), 'CAD based drilling using conventional twist drills', Academic Journal of Manufacturing Engineering, Vol. 7, No 1, pp. 202-209.
• J.X. Gao, B.M. Manson, P. Kyratsis, (2000), 'Implementation of concurrent engineering in the suppliers to the automotive industry', Journal of Material Processing Technology Vol. 107, pp. 201-208.
• Kyratsis P., Manson Β.Μ. (1999), 'Implementing Concurrent Engineering in Supply Chain Companies and the Role of CAE Technology', Engineering Designer, Vol. 25, no. 5, pp. 4-8.